Keahlian Profesional (Professional Membership)

1. Member of the Malaysian Technical and Vocational   Association – Life Member

2. University of Sheffield Alumni – Life Member

3.      University of Wisconsin Alumni – Life Member

4.      Professional Directory for Ministry of Education 1999

5.      Mechanical Engineering Staff Welfare Club (KESUMA), ITTHO/Chairman (from 1999-2000)

6.      Member of KRITTHO

7.      Member of Kolej Universiti Teknologi Tun Hussein Onn Staff Club (KSKUiTTHO)/Chairman of Staff Welfare Committee (March, 2001 to present)

8.      Member of the Public Higher Learning Institute (IPTA) Educational Council Deans, Malaysia

9.      Panel Member of the Educational Standard under The Ministry of Education, Malaysia.

10.   Jointly Committee Member of Technical Education Division (JPTek), Ministry of Education, Malaysia and KUiTTHO.

11.   Interface Management Programme For Key Stakeholders In the Implementation of The National Dual Training System (NDTS) In Malaysia’, Jerman (8-17 Mei, 2005)

12.   The Chairman of  Parent and  Teacher Association for Sekolah Menengah Teknik Bukit Piatu, Melaka

13.   External Examiner for Universiti Teknologi Malaysia, Skudai for the Master and PhD Student (2005)

14.   Member of Bachelor Education Management Programme Committee for  Universiti Putra Malaysia

15.   Member of Academic Board for Master Program, Universiti Malaysia Sabah

16.   Evaluator for ‘Pro Evaluator for Article ”Kesan Latihan Perguruan Ke atas Faktor Pemilihan Profession Perguruan” (JTE/2005/50)-Penerbit Universiti Teknologi Malaysia.(2006)

17.   Evaluator for ‘Program Sarjana Pendidikan (Teknologi Maklumat dan Multimedia), Universiti Teknologi Malaysia’. (2006- on going)

18.   External Examiner for Universiti Putra  Malaysia Ph.D Student.  Thesis “ Business Students Perceptions of Service Quality, Is Relationship To Their Satisfaction. And Likehood To Recommend  Polytechnics To Others’.

19.   Internal Examiner For KUiTTHO Master by Research Student. Hartati Wiji Wahyuni. Thesis “Pengaruh Gaya dan Aktiviti Penasihatan Akademik Terhadap Keberkesanan Perlaksanaan Sistem Penasihatan Akademik

20.   External Examiner for the Post Of Assoc. Professor at University College of Engineering & Technology Malaysia – Dr. Abdullah bin Ibrahim (September 2006)

21.   Chairman of the ‘Penyediaan Kertas Cadangan Kriteria Pemilihan Guru’ Committee – Jemaah Dekan  Pendidikan IPTA – 14 September 2006

22.   External Examiner for the Post of Professor at Universiti Teknologi Malaysia – Assoc. Prof. Dr. Mohamed Najib bin Abdul Ghafar, Assoc. Prof. Dr.Md. Nor bin Bakar – Oktober 2006

Bidang Khusus (Area of Specialization)

Planning and Management in TVET, TVET Teacher Education, TVET Competency Study, Dual Training System in TVET, Continuing Education and TVET, Human Resource Development, Career Development, Industrial Relation, Qualitative Research in Education, Education Sustainable Development (ESD)– TVET, Development of Thinking Skills – TVET, Skills Training and Development

Penyelidikan Jangka Pendek (Short Term Research)

1.      Feasibility study on Plastic Manufacturing Technology Sharing Source Center for Small Medium Industry (SMI), Johor, Malaysia.  (Research Management Centre, Universiti Teknologi Malaysia Grant (Amount – RM8,000) (Researcher: Dr. Sulaiman B Hassan, Masnin Karmin). Completed

2.      The Development of Computer-Based Inventory System for Technical Laboratory. Short Grant Research 2002 under the Research, Consultancy and Continuing Education Centre, KUiTTHO. Research Leader (Amount – RM16,000.00). Completed

3.      A Feasibility Study on the Degree of Technical and Vocational Education Program for In-service ILA’s Academic Staff. Short Grant Research 2002 under the Research, Consultancy and Continuing Education Center, KUiTTHO.  Research Leader (Amount – RM18,000.00). Completed

4.      E-Learning Training Matrices for KUiTTHO. Short Grant Research 2002 under the Research, Consultancy and Continuing Education Centre, KUiTTHO.  Researcher (Amount – RM20,000.00). Completed

5.      Potential Involvement in Intrepreneurial Among KUiTTHO’s Student Compared to Student of  Public Higher Learning Institutions. Short Grant Research 2002 under the Research, Consultancy and Continuing Education Centre, KUiTTHO.  Researcher (Amount – RM10,000.00). Completed

6.      Knowledge and Integration Practice Among KUiTTHO’s Student. Short Grant Research 2002 under the Research, Consultancy and Continuing Education Center, KUiTTHO.  Researcher (Amount – RM8,000.00). Completed

7.      Development of TPU1 System Resource Kit for Technical and Vocational Teaching and Learning at KUiTTHO. Short Grant Research 2002-2004 under the Research, Consultancy and Continuing Education Centre, KUiTTHO.  Researcher (Amount – RM16,000.00). Completed

8.      KUiTTHO’s Teaching Practical Program: Teaching Performance Exploration of the Student. Short Grant Research 2003-2005 under the Research, Consultancy and Continuing Education Centre, KUiTTHO.  Researcher (Amount – RM33,000.00). Completed 

9.      Visual Learning Style for Technical Students Through the Development of  Graphics and Animations orientation Courseware. Short Grant Research 2003-2005 under the Research, Consultancy and Continuing Education Centre, KUiTTHO.  Research Leader (Amount – RM35,000.00). completed

10.   Formation of Desired Engineering Competencies in Malaysia, Short Grant Research 2005-2007 under the Research, Consultancy and Continuing Education Centre, KUiTTHO.  Research Leader (Amount – RM13,500.00). on-going.

11.   Modeling and Simulation in Support of the Design and Construction of Business  Driven Manufacturing Automation System. Application for R&D Funding Under IRPA, RMK8 (Status: Technical Evaluation), (2003) Researcher.

12.   Collaborative Support Systems Initiatives for Excellence in Technical and Vocational Education (CoSSIETAVE). Application for R&D Funding Under IRPA, RKM8  ), (Status: Technical Evaluation) (2003) Research Leader.

13.   The Development of a Practical Engineering Education Model for the Training of Malaysian Engineers. Application for R & D Funding Under IRPA, RMK 8. (Status: Technical Evaluation)  (2004) Research Leader.

14.   Design and Development of Technical and Vocational Portal and Modules. Application for R & D Funding Under IRPA, RMK 8. (Status: Technical Evaluation) (2004) Research Leader.

15.   Formation of Desired Engineering Competencies in Malaysia, Fundemantal Research  under the Research, Consultancy and Continuing Education Centre, KUiTTHO. Research Leader (RM8,000.00) 12 months (1 Jun 2006 – 31 Mei 2007)

Penyelidikan Jangka Panjang (Long Term Research)

1.      The Development of Transnational Standards for Teacher Training for Technical Education and Vocational Training (TT-TVET) with a Multidisciplinary and Industrial Orientation. Research Group: Professor Dr. Georg Spoettl M.A. (Jerman), Miquel Angel (Spain), Hd Holler (Spain), Masriam Bukit (Indonesia),  Soekarno Datu (Indonesia), Iwin del Brand (Jerman), Dr. Wan Mohd Rashid b. Wan Ahmad (Malaysia), Dr. Noraini bt. Kaprawi (Malaysia) Under Asean-EU University Network Programme (AUNP) Grant , Amount : EURO850,816.92. (December, 2005 - 2007).  Research Leader   for National Level. ID/Asia-Link/009/110-006

Penerbitan (Publication)

Journals

1.      Ahmad b. Esa, Jailani b. Md. Yunos, Noraini bt. Kaprawi, Berhanuddin Mohd Salleh, ‘Infusion of Generic Skills Through Co-curricular Activities At Malaysian Polytechnics’, Journal of Technology Malaysia 2006 Article in process

2.      Ahmad b. Esa, Jailani b. Md. Yunos, Noraini bt. Kaprawi,  ‘Kokurikulum di Politeknik Membantu Graduan Menguasai Kemahiran Generik Dalam Sektor Perindustrian di Malaysia’, Journal of Technology Malaysia 2005

3.      Ahmad b. Esa, Jailani b. Md. Yunos, Noraini bt. Kaprawi, ‘Penerapan Kemahiran Generik Menerusi Kokurikulum Di Politeknik’, Journal of Education, 2005 Article in process

4.      Yunos J, L. Barton, ‘The Role of the Technical and Vocational Education Planners in Relation to the Way Manpower and Educational Planning has Develop’, Journal of Vocational Education and Training, 1998

5.      Jailani b. Md. Yunos, Noraini bt. Kaprawi, Ahmad b. Esa, ‘Persepsi Pensyarah Terhadap Penerapan Kemahiran Komunikasi Menerusi Kokurikulum di Politeknik’, Jurnal Penyelidikan Pnedidkan Jilid VII 2005.

6.      Jailani b. Md. Yunos, Noraini bt. Kaprawi, Ahmad b. Esa, ‘Kebolehpercayaan Inventori Kemahiran Generik’, Journal KUITTHO

7.      Jailani b. Md. Yunos, Noraini bt. Kaprawi, Ahmad b. Esa, ‘Persepsi Pensyarah Terhadap Penerapan Kemahiran Kepimpinan Menerusi Kokurikulum di Politeknik’,Journal KUiTTHO     

8.      Jailani b. Md. Yunos and Mohd Noor b. Hashim, ‘Contextualising Instructions: Addressing the Issues of Bloom’s Taxonomy of Objectives’ VOTECH Journal: On-line Fully Refereed Educational Journal. Submitted on: 10. 12. 2001

9.      Jailani b. Md. Yunos, Ahmad b. Esa,  Noraini bt. Kaprawi. ‘Peningkatan Kemahiran Bakal Pensyarah Politeknik Menerusi Kursus Pengurusan Kokurikulum’. Journal KUiTTHO  

10.   Jailani b. Md. Yunos, Ahmad b. Esa, Noraini bt. Kaprawi . ‘Peranan Kokurikulum Dalam Pembangunan  Kemahiran Generik’. Journal Sains Sosial KUiTTHO Jld. 2 bil. 1, Disember 2004

11.   Jailani b. Md. Yunos. ‘UNESCO International Meeting on Innovation and Excellence in TVET Teacher/Trainer Education.’ Journal UNESCO UNEVOC. Edited and Compiled by UNESCO-UNEVOC International Centre Publications. 2005

12.   Jailani Md. Yunos, Mohd Yusop b. Ab. Hadi, Jamaluddin b. Hashim. “Pengetahuan Bekerja Dalam Sistem Pendidikan Formal Ke arah Melahirkan Pekerja Berketerampilan“. Journal KUiTTHO

13.   Jailani Md. Yunos, Johnson Lim Soon Chong, Ghazally Spahat. “Development and Evaluation of E-Module For Pneumatics Technology” The Malaysian Online Journal of Instructional Technology (MOJIT), December 2005

14.   Jailani Md. Yunos, Jamaluddin Hashim. “A Survey on The Technical Educational Tour Planning among the Students of Diploma in Tourism Management in the Polytechnic”,  International Perspectives on Education and Training , Edited by John Kelvyn Richards, ISBN : 960-6672-03-4, 2006 by ATINER

Papers Presented in Seminars/Conferences

1.      Jailani b. Md. Yunos, ‘CGAC Roles and Students’ Occupational Expectations in Relation to Vocational Schools on Malaysia’, International Conference on Technical and Vocational Education (21 –23 November, 2000)(Organised by Institut Teknologi Tun Hussein Onn and  Technical Education Department, Ministry of Education Malaysia)- Presenter and Participant.

2.      Jailani b. Md. Yunos, ‘Quality and Standardisation in Manufacturing Technology’, Seminar on Manufacturing Technology Based Welding and Fabrication (19 March, 1999) (Organised by Mechanical Engineering Department, ITTHO) – Presenter and Participant.

3.      Jailani b. Md. Yunos, ‘Leaderships and Supervisory Management Strategic for Organisation Excellence’ Motivation Program for Mechanical Engineering Supporting Staff (26 – 28 May, 2000) (Organised by Mechanical Engineering Department, ITTHO) – Presenter and Facilitator

4.      Jailani b. Md. Yunos, Maizam bt. Alias and Noraini bt. Kaprawi, ‘KUiTTHO As A UNESCO-UNEVOC Associate Centre: Roles and Concern’ Regional UNEVOC Experts Meeting   (Validation of Draft Manual for Managers of UNEVOC Centre) Vientiane, Lao PDR 1 – 3 October 2001

5.      Jailani b. Md. Yunos, ‘Occupational Choice: Influence of Casual and Institutional Factors’, International Conference on Technology and Vocational –Technical Education: Globalisation and Future Trends (12-13 November, 2001) (Organised by Faculty of Education, Universiti Kebangsaan Malaysia and Malaysian National Commission for UNESCO) – Presenter and Participant. 

6.      Jailani b. Md. Yunos, ‘Contextualising Instruction in TVET: Developing a Hands-on Approach In Teaching and Learning’, International Conference on Technology and Vocational –Technical Education: Globalisation and Future Trends (12-13 November, 2001) (Organised by Faculty of Education, Universiti Kebangsaan Malaysia and Malaysian National Commission for UNESCO) – Presenter and Participant.

7.      Jailani b. Md. Yunos and Mohd Yusof b. Hadi, ‘Membendung Gejala Pelajar Berisiko Tinggi Pada Awal Pengajian: Satu Pengalaman Di Institusi Pengajian Tinggi Awam’ National Seminar JPPG 2002: Towards Prestigious Teaching Profession, Holiday Villa, Alor Setar, Kedah  (19 – 20 May 2002) (Organised by Bahagian Pendidikan Guru) Presenter and Participant.

8.      Jailani b. Md. Yunos and Mohd Yusof b. Hadi, ‘Pendidikan Teknik dan Vokasional satu Kajian Kes Di Institusi Pendidikan Teknikal Di Malaysia’ National Seminar JPPG 2002: Towards Prestigious Teaching Profession,  Hotel Holiday Villa, Alor Setar, Kedah  (19 – 20 May 2002) (Organised by Bahagian Pendidikan Guru) Presenter and Participant.

9.      Jailani b. Md. Yunos, Ahmad b. Esa and Mohd Yusof b. Hadi, ‘Memartabatkan Bahasa Melayu Melalui Sistem Pendidikan Teknik dan Vokasional: Satu Tinjauan Dalam sistem Pendidikan Di Malaysia’  International Conference on Malay Studies, Beijing, China (8 – 15 October 2002) (Organised by UPSI) Presenter and Participant.

10.   Jailani b. Md. Yunos, Mohd Yusof b. Hadi and Ahmad b. Esa, ‘Keperkasaan Bahasa Melayu Dalam Kurikulum Pendidikan Teknik dan Vokasional: Satu Kajian Kes Di Institusi Pendidikan Teknikal Di Malaysia ’  International Conference on Malay Studies, Beijing, China (8 – 15 October 2002) (Organised by UPSI) Presenter and Participant.

11.   Jailani b. Md. Yunos, Mohd Yusof b. Hadi, ‘Keberkesanan Program Kokurikulum Keusahawanan Dalam Memotivasikan Pelajar Menjadi Usahawan Industri Kecil dan Sederhana’   National IKS Finance Seminar, Hotel City Bay View, Langkawi (19 – 20 October 2002) (Organised by Universiti Utara Malaysia) Presenter and Participant.

12.   Jailani b. Md. Yunos, Laila bt. Musa, Mohd Yusof Abdul b. Hadi and Ahmad b. Esa, ‘Perception of Diploma in Accountancy Students Upon Industrial Training Programme: Malaysian Technical and Vocational Education Institution an Experience’  International Conference on The Challenge of Learning and Teaching in a Brave New World: Issues and Opportunities in Borderless Education’ The JB Hotel, Hatyai, Thailand (8 – 15 October 2002) (Jointly Organised by Hatyai City College, Hatyai, Thailand and School of Cognitive Sciences and Education, UUM) Prosiding.

13.   Jailani b. Md. Yunos, Ghazally b. Spahat and Mohd Yusof Abdul b. Hadi, ‘Learning Content Management System in e-Learning’ 15th Educational Technology Convention,Technology Based Instruction and Learning : Re-evaluation. Hotel Putera, Kangar, Perlis (6 – 9 September 2002)

14.   Jailani b. Md. Yunos and Ahmad b. Esa, ‘Pengetahuan, Amalan dan Sikap Peniaga Kecil Terhadap Etika Perniagaan: Satu Kajian Rintis’ National Seminar on Professional and Applied Ethics. Equatorial Hotel, KL (9 – 10 October 2002) (Organised UKM)

15.   Jailani b. Md. Yunos and Ahmad b. Esa, ‘Memertabatkan Profesion Pendidikan Menerusi Penilaian Kerja Amali (PEKA)’ National Seminar on School Based Progress Evaluation. Bay View Hotel, Penang (14 - 15 October 2002) (Organised by USM)

16.   Jailani b. Md. Yunos, “Kajian Teknik Delphi dalam Pembangunan e Staf Politeknik Malaysia.”Seminar Pendidikan Kebangsaan anjuran BPG & KPM (20,21 & 22 August 2003)

17.   Jailani b. Md. Yunos, Mohd Nor b. Ihkasan, Wahid b. Razzaly. “Pembangunan e-Staf  untuk Pengintegrasian e-pembelajaran di Politeknik”. Persidangan e-Pembelajaran Kebangsaan. (7-9 June 2004)

18.   Jailani b. Md. Yunos, Haslina bt. Hashim, Azizi b. Abd. Rahman, ‘Pelaksanaan Kursus Kemahiran (MLVK) Bagi Pelajar-Pelajar Pendidikan Khas Di Sekolah Menengah Teknik’,  National Seminar on Special Education. Social Safety Training Institute., KWSP (ESSET) Selangor. (10 -12 August 2004) (Organised by  Fakulti Pendidikan, UKM)

19.   Jailani b. Md. Yunos, Haslina bt. Hashim, Azizi b. Abd Rahman, “Menjana Keterlibatan Pelajar Pendidikan Khas Cacat Pendengaran Dalam Program Inklusif Di Lima Buah Sekolah Menengah Teknik Seluruh Malaysia’, National Seminar on Special Education. Social Safety Training Institute., KWSP (ESSET) Selangor. (10 -12 August 2004) (Organised by  Fakulti Pendidikan, UKM)

20.   Jailani b. Md. Yunos, Noraini bt. Kaprawi, ‘Strengthening The Technical and Vocational Teacher Education Program Through Formulation of Standards For Education Program : Kolej Universiti Teknologi Tun Hussein Onn , The UNESCO International Meeting On Innovation And Excellence In TVET Teacher Education’, Hangzhaou, China (8 – 10 November 2004)

21.   Jailani b. Md. Yunos, Noraini bt. Kaprawi, Wahid b. Razzaly, Faraweheeda bt. Rashid. ‘Quality Assurance for Continuing Engineering Education :   The Tun Hussein Onn University College of Technology Model’, 2004 Vocational Education Training Research Conference (NCVER), Tweed Heads, New South Wales, Australia.(13-16 July, 2004)

22.   Jailani b. Md. Yunos, Jamaluddin b. Hashim, Zainal Fikri b. Zamzuri, Zahidi b. Zamzuri, ’Sistem Pengstoran Inventori Makmal Berbantu Komputer di Makmal Kejruteraan Institusi Pendidikan Teknik dan Vokasional’, Integration of Instructional Design and Technology in Teaching and Learning. Paradise Sandy Beach Resort, Tanjung Bungah, Pulau Pinang (17-20 September 2004)

23.   Jailani b. Md Yunos, Mohd Yusop b. Abd Hadi, Nor Ratna bt. Masrom. ‘The inventors of readiness for students from education institution and trainees skill training center to be k-workers to fulfill industrial needs.’ International Conference in Guidance, Social Inclusion and Career Development, Organised by IAEVG, A Coruna University, Spain. University of LA Coruna, Spain. 15 – 18 September 2004.

24.   Jailani b. Md Yunos, Lai Chee Sern . ‘Pembangunan dan Penilaian Prototaip E-Modul Matapelajaran Kejuruteraan Pengeluaran.’ 17th Educational Technology Convention. Paradise Sandy  Beach Resort, Tanjung Bungah, Pulau Pinang. 17-20 September 2004.

25.   Jailani b. Md Yunos, Mohd Salleh b. Tahar, Noraini bt. Kaprawi, Wahid b. Razzaly, Ilyas b. Hj Hashim, Abdul Mutalib b. Leman, Rosni b. Ahmad. ’Penghasilan Kit Sumber Penyamanan Udara (Sys.TPU.1) Dalam Pengajaran dan Pembelajaran Pendidikan Kejuruteraan di KUiTTHO’. 17th Educational Technology Convention. Paradise Sandy  Beach Resort, Tanjung Bungah, Pulau Pinang. 17-20 September 2004.

26.   Jailani b. Md Yunos, Ahmad b. Esa. ‘Intergrated of Generic Skill Co-curricular and Industry Need to Develop Malaysian Human Resource : Descriptive Analysis’ . International Conference on Guidance Social Inclusion and Career Development. University Coruna, Spain. 15-17 September 2004.

27.   Jailani b. Md Yunos, Noraini bt. Kaprawi, Ahmad b. Esa. ‘Perlaksanaan Kemahiran Generik Menerusi Kegiatan Kokurikulm Di Politeknik bagi Memenuhi Keperluan Industri.’ First International Conference UPSI- UPI. Organised by  UPSI. Hotel Renaissance, Kuala Lumpur. International Level. 9-10 Ogos 2004

28.   Jailani b. Md Yunos, Noraini bt. Kaprawi, Ahmad b. Esa. ‘Peranan  Kokurikulum Dalam Menjana Peradaban Melayu’ . International Conference on Malay Culture 2 Organised by UPSI. Legend Hotel, Kuala Lumpur. International Level. 26-28 Februari 2004.

29.   Jailani b. Md Yunos, Mohd Yusop b. Ab. Hadi, Noraini bt. Kaprawi. ‘Kesediaan Menjadi K-Worker Di Kalangan Wanita Bagi Memenuhi Keperluan Industri.’ New Era Women Seminar. Universiti Malaya . 26 Mac 2005.

30.   Jailani b. Md. Yunos, Mohd Nor b. Hashim, ‘Training Provider’s Perspectives on Technical Manpower’. Kolej Universiti Teknologi Tun Hussein Onn’s Views, Technology Association National Workshop on Future Workforce, Alson Klana Resort Seremban, ( 23 April 2005)

31.   Jailani b. Md. Yunos, Jamaluddin b. Hashim, Nor Ratna bt. Masrom, ‘A Survey On the Technical Educational Tour Planning Among The Students Of Diploma In Tourism Management In The Poliytechnic’, 7th. International Conference On Education’, Athens, Greece. (20-22 May, 2005)

32.   Jailani b. Md. Yunos, Jamaluddin b. Hashim, ‘A Survey on Potential Creativities in the Practical Project among the Secondary Technical School Students in Malaysia’, 7th. International Conference On Education, Athens, Greece. (20-22 May, 2005)

33.   Jailani b. Md. Yunos, Noraini bt. Kaprawi, Ahmad b. Esa, ‘The Implementation of the Generic Skills Through Co-Curriculum at the Polytechnics to Fulfil the Industrial Needs in Malaysia’, 7th International Conference on Education, Athens, Greece.(20 – 22 May, 2005)

34.   Jailani b. Md. Yunos, Baharom b. Mohamad, Noraini bt. Kaprawi, ‘Nilai Murni: Penghayatan dan Amalannya Di Institusi Pengajian Tinggi’, Hotel Shangri-La, Pulau Pinang (28-30 August, 2005)

35.   Jailani b. Md. Yunos, Noraini bt. Kaprawi, Ahmad b. Esa, ‘Penerapan Kemahiran Kepimpinan Menerusi Kokurikulum di Politeknik’. Educational Research Seminar MPBL 2005. Holiday Inn Kuching Sarawak. National Level. (15- 16 September 2005).

36.   Jailani b. Md. Yunos, ‘Malaysia’s Quest for the High Skilled Manpower: Technical and Vocational Education and Training (TVET) Approach’, sub-regional Induction/Refresher Course & mapping UNEVOC Network OVEC, Bureau of Vocational Teacher and Personnel Competency Development, Bangkok (8-9 August 2005)

37.   Jailani b. Md. Yunos, Ismail b. Hj. Bakar, Wan Mohd Rashid b. Wan Ahmad, Noraini bt. Kaprawi, Berhanuddin b. Mohd Salleh, Nor Lisa bt. Sulaiman ‘How Technical and Vocational Education Training (TVET) and Entrepreneurship can be Linked to Lifelong Learning and the World of Work’, The Development of Technology and Technical-Vocational Education & Training In An Era Of Globalization, Pan Pacific Hotel, KLIA, (23 – 24 August 2005)

38.   Jailani b. Md. Yunos, Ahmad Rizal b. Madar. ‘Gaya Pembelajaran Visual Pelajar Teknikal Menerusi Pembangunan Koswer Berorentasikan Grafik dan Animasi.’ 18th Educational Technology Convention. Terengganu Educational Resource Centre Complex, Marang, Terengganu. 18-19 September 2005

39.   Jailani b. Md Yunos, Johnson Lim Soon Chong, Ghazally b. Spahat. ‘Development And Evaluation of E-Module For : Pneumatics Technology’. 18th Educational Technology Convention. Terengganu Educational Resource Centre Complex, Marang, Terengganu. 18-19 September 2005

40.   Jailani b. Md Yunos, Noraini bt. Kaprawi, Ahmad b. Esa. ’Membina Kemahiran Generik Menerusi Sukan di Politeknik  Malaysia’. 1st  Asia Pacific Sport Science Conference 2005. Kota Kinabalu. Level: Asia. 28-29 Mac 2005.

41.   Jailani b. Md Yunos, Noraini bt. Kaprawi, Ahmad b. Esa.  ’Pembinaan Penampilan diri Wanita Menerusi Kokurikulum’. New Era Women Seminar. Universiti Malaya . National Level. 26 Mac 2005.

42.   Jailani b. Md. Yunos, Ahmad Rizal b. Madar, “Gaya Pembelajaran Visual Pelajar Teknikal Menerusi Pembangunan Koswer Berorentasikan Grafik dan Animasi”.  Seminar Teknologi Pendidikan ke 18, Kompleks Pusat Sumber Pendidikan Negeri Terengganu, Marang Terengganu.  16-19 September, 2005.

43.   Jailani b. Md. Yunos, Ahmad Rizal bin Madar, Somchai a/l Enoi. “Keberkesanan Penggunaan Koswer Animasi Grafik Dalam Mata Pelajaran Kejuruteraan”. Seminar Kebangsaan ICT Dalam Pendidikan 2005. Hotel Prince, Kuala Lumpur. 17 – 19 November, 2005.

44.   Jailani b. Md. Yunos, Ahmad Rizal b. Madar, Nin Hayati bt. Mohd Yusoff, Saifullizam b. Puteh. “Keperluan Pembelajaran Berbantu Multimedia Bagi Subjek Sistem Elektronik di Politeknik Kementerian Pengajian Tinggi Malaysia (KPTM)”, National Conference On Skills & Competencies In Education, Universiti Sains Malaysia Pulau Pinang, 29-30 November, 2005.

45.   Jailani Md. Yunos, Wan Mohd Rashid Wan Ahmad, Noraini Kaprawi, Wan Azlinda Wan Mohamed, Norlisa Sulaiman, Kahirol Mohd Salleh, “Technical and Vocational Education In Malaysia” Seminar on International Approaches to TVET Development, Kabul, Afghanistan, 21-23 November, 2005.

46.   Jailani Md. Yunos, Wan Mohd Rashid Wan Ahmad, Noraini Kaprawi, Wan Azlinda Wan Mohamed, Norlisa Sulaiman, Kahirol Mohd Salleh, “Curriculum Development In Malaysia” Seminar on International Approaches to TVET Development, Kabul, Afghanistan, 21-23 November, 2005.

47.   Jailani Md. Yunos, Wan Mohd Rashid Wan Ahmad, Noraini Kaprawi, Wan Azlinda Wan Mohamed, Norlisa Sulaiman, Kahirol Mohd Salleh,  “Building The Capacity of TVET Teacher” Seminar on International Approaches to TVET Development, Kabul, Afghanistan, 21-23 November, 2005.

48.   Jaliani Md. Yunos, Saifullizam Puteh, Mazlina Nasir, PM Sapon b. Ibrahim, Jamaluddin Hashim, Ahmad Rizal Madar,”Kemahiran Berfikir di Kalangan Pensyarah Pelatih KUiTTHO Dalam Program Latihan Mengajar” Persidangan Kebangsaan Kemahiran dan Kecekapan dalam Pendidikan 2005. 29-30 November 2005

49.   Jailani Md. Yunos, Ahmad Rizal bin Madar, Wan Zaimi b. Wan Yusof & Hashima binti Hamid, Prof. Madya Dr. Widad binti Othman (Fakulti Pendidikan UTM) “Penilaian Tentang Elemen Kemahiran Diri Pelajar Politeknik Kementerian Pengajian Tinggi Malaysia (KPTM) Untuk Memenuhi Kehendak Separa Mahir Industri”, 3rd International Conference On Measurement and Evaluation In Education, Grand Plaza Parkroyal Hotel Penang, 13-15 Februari, 2006

50.   Jailani Md. Yunos, Mohd Yusop Abd. Hadi, “Penguasaan Pengetahuan Pembelajaran Sepanjang Hayat dan Celik Komputer di Kalangan Pelatih-Pelatih Pusat Latihan Kemahiran Sebagai Persediaan untuk menjadi Pekerja Berpengetahuan (K-Worker) Di Organisasi Industri”, Seminar Kebangsaan Komunikasi Ketiga 2006, The Gurney Resort Hotel and Residences, Pulau Pinang, 16-18 Jun 2006.

51.   Jailani Md. Yunos, Wan Mohd Rashid Wan Ahmad, Berhannudin bin Mohd. Salleh, Ahmad Esa, Kaedah Pengajaran : Mengapa?, Seminar Pendidikan Pengajaran dan Pembelajaran Bidang Pendidikan Teknologi dan Hospitaliti, Dewan Tunku Ibrahim, Kolej Universiti Teknologi Tun Hussein Onn,  6 Jun 2006.

52.   Ahmad Rizal Madar, Jailani Md. Yunos, Nin Hayati Mohd Yusoff & Hashima Hamid, “Rekabentuk Pembelajaran Animasi Grafik Bagi Subjek Sistem Elektronik di Politeknik Kementerian pengajian Tinggi Malaysia (KPTM), UPSI Regional Seminar and Exhibition on Educational Research (UPSI Eduresearch 2006)  PWTC, Kuala Lumpur, 27-30 July 2006

53.   Mohd Salleh Tahar, Jailani Md. Yunos, Noraini Kaprawi, Khairul Fahmi Ali, “Rekabentuk Mesin Semulator Pengajaran Kejuruteraan Penyaman Udara Kenderaan Berasaskan Tekanan dan Suhu. Sistem Bebantu Komputer (Sistem TPU 2), Konvensyen Teknologi Pendidikan Ke 19, Awana Porto Malai, Langkawi, Kedah, 9 – 11 September, 2006

54.             Wahid Razzaly, Jailani Md. Yunos, Wan Mohd Rashid Wan Ahmad, Noraini Kaprawi, “Problem Based Learning Initiatives at KUiTTHO:  Educational Perspective”,Annual Conference On Teacher Education 2006’, Hotel Le Meridian, Kota Kinabalu, Sabah 6-8 September, 2006

Technical Reports

1.      Working Paper on Proposed Centre for Innovation and Consultancy (CENTRIC) at ITTHO. (2001)

2.      Working Paper on Proposed Advance Centre of Technical and Vocational Education (ACTiVE) at KUiTTHO. (2003)

3.      Working Paper on Proposed Application and Evaluation Form of KUiTTHO Quality Award (21 Categories). (2003)

4.      Senate Working Paper on Proposed New Program of Bachelor Degree in Technical Education (Electrical and Electronic Engineering Studies) (2005) 

5.      Senate Working Paper on Proposed New Program of Bachelor Degree in Technical Education (Manufacturing Engineering Studies) (2005) 

6.      Senate Working Paper on Proposed New Program of Bachelor Degree in Technical Education (Architecture Studies) (2005) 

7.      Senate Working Paper on Proposed New Program of Bachelor Degree in Technical Education (Tourism Management) (2005) 

8.      Senate Working Paper on Proposed New Program of Bachelor Degree in Education (Education Management) (2005) 

9.      Senate Working Paper on Proposed New Program of Master Degree in Technical Education (Design and Instructional Technology) (2005) 

10.   Senate Working Paper on Proposed New Program of Master Degree in Technical Education (Leadership and Management) (2005) 

11.   Senate Working Paper on Proposed New Program of Master Degree in Technical Education (Production Technology) by Dual System (2005) 

12.   Senate Working Paper on Proposed New Program of Master Degree in Technical Education (Industrial Electronics) by Dual System (2005) 

13.   Senate Working Paper on Proposed New Program of Master Degree in Technical Education (Electrical Engineering) (2005) 

14.   Senate Working Paper on Proposed New Program of Master Degree in Technical Education (Mechanical Engineering) (2005) 

15.   Senate Working Paper on Proposed New Program of Master Degree in Technical Education (Civil Engineering) (2005) 

16.   Working Paper on Proposed PhD in TVET Program by Dual System and PhD in Engineering Program by Dual System  - prepared  for the Ministry of  Human Resource.  (2005)

17.   Quality Assurance Accreditation Document of Bachelor Degree in Technical and Vocational Education. Prepared for the Quality Assurance Department, Ministry of  Higher Education. (2004)

18.   Review of University Academic Regulation (Bachelor and Diploma Program) Third Edition Kolej Universiti Teknologi Tun Hussein Onn.(2005)  

19.   Program Certicifation Document of Bechalor Degree in Technical and Vocational Education. – prepared for the Public Service Department, Malaysia  (2005)

20.   Working Paper on Interface Management Programme for Key Stakeholders in the Implementation of the National Dual Training System (NDTS) in Malaysia – prepared for the Ministry of Human Resource, Malaysia   (2005)

21.   Working Paper on International Conference Technical and Vocational Education and Training (ICTVET 2006) – prepared for  the Executive Committee, KUiTTHO (2005) 

22.   Working Paper on National Dual System Implementation Action Plan.    – prepared for the National Vocational and Training Council, Ministry of Human Resource. (2005)

23.   Working Paper on Land Application at Mersing Area, Johor for The Development of  Hospitality Department , Hotel facilities and MICE, Research Centre, Recreation Land and Human Being Development Centre for KUiTTHO –Board of Directors Approval KUiTTHO (2005)

24.   Final Report  on UNEVOC Regional Meeting  of Experts : Improving Subject knowledge and exchange of information Through UNEVOC. Prepared for UNESCO-UNEVOC, Bangkok (2003)

25.   Resolution Report from the National Conference on Technical and Vocational Education (NCTVET 2003)    Prepared for the Ministry of Education and the Ministry of Human Resource, Malaysia. (2003)

26.   Potensi Keterlibatan Dalam Bidang Keusahawanan Di Kalangan Pelajar-Pelajar KUiTTHO dan Perbandingan Dengan Beberapa Institusi Pengajian Tinggi Yang Lain (November 2003)

27.   Kesedaran dan Amalan Integrasi Nasional di KUiTTHO (Oktober 2003)

Books

1.      A Guide for Managers of UNEVOC Centres and UNEVOC Associate Centres. Book - Published

2.      Jailani Md Yunos and Saifulizam Puteh ‘Panduan Kecekapan Mengajar’ Book – Printing Process

3.      Jailani Md Yunos and Salleh Tahar ‘Pengurusan dan Kepimpinan dalam Pendidikan’ Book – Under Evaluation of Publication Centre, KUiTTHO

4.      Jailani Yunos, ‘Ekonomi Kejuruteraan’, Learning Module - Level 3 

5.      Jailani Yunos, ‘Pengurusan, Undang-Undang dan Etika’, Learning Module–Level 3 

6.      Jailani Yunos and Jamaluddin Hashim, ‘Teknologi Pengeluaran’, learning Module – Level 3 

7.      Jailani Yunos, ‘Principles of Packaging Engineering’, learning Module – Level 1 

8.      Jailani Yunos, ‘Packaging Equipment and Operations’, learning Module – Level 2

9.      Jailani Yunos and Jamaluddin Hashim, ‘Teknologi Pembuatan’, Learning Module – Level 3 

10.   Jailani Yunos, Atan Hussin and Saifullizam Puteh, ‘Grafik Kejuruteraan’, Monograf

11.   Jailani Yunos, Atan Hussin and Kamaruzaman Md Jidi, ‘ Pengurusan Pendidikan, Monograf 

12.   Jailani Yunos and Mohd Izam Ghazali, ‘Kaedah Mengajar Bidang Khusus’ Learning Module – Level 2

13.   Jailani Yunos, Packaging Testing’ Learning guide.

14.   Jailani Yunos, ‘Micro Teaching’ (Developing an e-Module using Blackboard5 software) (under development)

15.   Jailani Yunos and Hj. Mohd Salleh Hj. Tahar, ‘Teknologi Bahan’ Monograf

16.   Jailani Yunos and Mohd Nor Hashim, DST 105 Pendekatan Latihan dalam Dwi-Sistem INSEP-Learning Module-Level 3

Khidmat Nasihat (Consultancy)

1.      Preliminary Study Report on The Existing and Development of Institut Kemahiran Belia Negara (IKBN) for the Ministry of Youth and Sport, Malaysia (Cost RM28,000) 2002

2.      Preparations of Equipment Specification and Space Requirement  for the New Institut Kemahiran Belia Negara (IKBN) (Johor, P. Pinang and Sarawak) for the Ministry of Youth and Sport, Malaysia (Cost RM40 million) 2002

3.      Member of the Technical Evaluation Tender Committee  on Purchasing Mechanical Engineering Equipments for  Johor Bharu and Seberang Prai Polytechnics – World Bank Loan (3571-MA) (26 –31 October 1998) 2002

4.      Preparations of Equipment Specification and Space Requirement  for  University Al-Bukhary.  (Panel of Mechatronics) 2003

5.      Development of  Instructional Module for a Special Certificate Programme in Industrial Technology. Jointly Organised by the Faculty of Engineering Technology, KUiTTHO and the Kimberly-Clark Products (M) Sdn. Bhd., Kluang, Johor. (Cost RM50,000) 2004

6.      Cooperation Programme Between KUiTTHO and State of Johor (Area Dewan Undangan Negeri  Sungai Balang, Muar, Johor) : ‘Excellence in Science and Mathematic Subject’ (Cost RM10,000) 2004

7.      Cooperation Programme Between KUiTTHO and State of Johor (Area Dewan Undangan Negeri Sri Gading, Batu Pahat, Johor) : ‘Excellence in Science and Mathematic Subject’ (Cost RM26,000) 2005-present

8.      The Implementation of the In-service Training Program on Technical Engineering Drawing and Engineering Technology for Technical Teachers in Non-Technical School, Ministry of Education Malaysia. (Cost RM60,000) 2005 

9.      Industrial Skills Enhancement Program (INSEP), Economic Planning Unit, Prime Minister Department. Malaysia (Cost RM200,000) 2005

10.   Kursus Diploma Eksekutif Kimpalan dan NDT, The Welding Institute (TWI), 2006

Penganugerahan (Awards Received)

1.      17th. International Invention, Innovation Industrial Design & Technology Exhibiton 2006(ITEX 2006) Kuala Lumpur, Malaysia 19th – 21th. May, 2006. Bronze

2.      Anugerah Khas Penyelidikan, KUiTTHO 2005

3.      16th International Invention, Innovation, Industrial Design & Technology Exhibition, Malaysia. Gold Medal (2005)

4.      Competition for  Research Poster  (PhD Student) during Minggu Siswazah 2005 (Category –Social Science), Supervisor for En. Ahmad Esa, Second Place (2005)

5.      Excellent Service Award (UTM – 1999)

6.      President’s Service Award (National Association of Printing Ink Manufacturers) (1986)

Khidmat Masyarakat (Social Contributions)

National

1.      Member of Islamic Activities Committee for Taman Manis Parit Raja Muslim Resident Welfare association, 2000 – present

2.      Faculty’s Football Player for Veteran Teams

3.      Chairman of Mechanical Engineering Staff welfare Club (KESUMA), ITTHO (1999 –2000)

4.      Member of the Judging Panel/Committee for the ‘Malam Sayembara Puisi 1999’, Student’s Electrical Engineering Club (27 Feb 1999)

5.      Member of the Judging Panel/Committee for the Academic Quiz Project Competition 1998 , Student Representative Council, ITTHO (4 September 1998)

6.      Chairman of the Judging Panel/Committee for the Seminar on Action Research for Johore State 2001 (25 August 2001)

7.      Vice Chairman of the ‘PIBG Sekolah Kebangsaan Pintas Puding’, Parit Raja, Batu Pahat (October 2001-October 2002)

8.      Chairman of the ‘PIBG Sekolah Kebangsaan Pintas Puding’, Parit Raja, Batu Pahat (May 2002-May 2003)

9.      Chairman of the ‘PIBG Sekolah Menengah Teknik, Bukit Piatu, Melaka   (May 2004 - present)

10.   Committee Member for the Collaboration Program Between KUiTTHO and Johor State at “ Kawasan Dewan Undangan Negeri Sungai Balang, Muar” Program: Excellence Achievement in Science and Mathematics. (2003)

11.   Bengkel Pelaksanaan Perancangan Latihan dan Pembangunan Tenaga Pengajar Politeknik, Kolej Komuniti dan Sekolah Menengah Teknik/Vokasional Bagi Tahun 2001 hingga 2005. Di Politeknik Port Dickson (13 – 15 March 2001)

12.   Panel for Educational Standard Determination, IPTA Quality Assurance Unit, Department of Higher Learning, Ministry of Education Malaysia (26 August 2004)

13.   Member of the Public Higher Learning Institute of the Educational Council Deans, Malaysia. (2002 – present)

14.   Chairman for the Collaboration Program Between KUiTTHO and Johor State at “ Kawasan Dewan Undangan Negeri Sri Gading, Batu Pahat” Program: Excellence Achievement in Science and Mathematics. (2005)

15.   Main Committee Member for the 33rd Inter University Golf Tournament, Malaysia  (2005)

16.   Participating in the 48th National Day Parade for Good Governance Group, Ministry of Higher Learning, Malaysia at Putrajaya. (2005)

17.   Chairman of Main Committee for ‘Program Gerak Bakti KUiTTHO’ 19 - 23 September 2006, Bachok, Kelantan.

18.   Patron of Organizer Committee for ‘Program Gerak Bakti KUiTTHO’ 19 - 23 September 2006, Bachok, Kelantan.

International

1.      Manager of  UNESCO-UNEVOC  Centre, KUiTTHO (2003 – present)

2.      Board Member of  the Network on Innovation and Professional Development in TVET  UNESCO-UNEVOC, Bonn. Germany (2005 – present)

3.      Member of KUiTTHO Delegation Academic Visit to the United Kingdom Universities (University of East London, University of Birmingham, University of Salford, University of Warwick, University of Conventry)   (17 to 27 Mei 2005)

4.      Member of the Technical Visit Programme to Australian Universities and TAFE College, (11 – 19 May 2002)

5.      Member of Visiting Delegation on Stakeholders Interface Management- National Dual Training System (NDTS) Germany. (9-18 May, 2005)

6.      Member of United TVET Network On Innovation and Professional Development (UNIP) (10 November, 2004 – present